Installation led display can not only reflect the quality of products, but also determines the display results when used. Common installation led display has the following five categories:
Mosaic Installation
Suitable for smaller indoor screen. Due to the small installation space, in order not to occupy the space, according to Screen dug the size of the area the same size on the wall, the led display embedded in the wall. It requires wall is solid walls. Use maintenance mode before, the cost is higher.
Hanging installation

More suitable for the station led electronic display, LED electronic display and other large airports place signs indicating the role play. Requirements Screen smaller (10 square meters), the requirements must be suitable installation locations such as the top of the cross beam or lintel, and under normal circumstances Screen to add back cover.
Wall-mounted

Led display more suitable for indoor installation, smaller (10 square meters), the wall requirement is solid walls, hollow brick retaining wall or partition are not suitable for this simple installation.
Roof-mounted

Mainly applied to outdoor advertising led electronic display, the installation location is the roof of the main building, wind level with increasing height of buildings to be considered also increases.
Column Installation

Used for outdoor advertising led display installation, vision, more open around places such as squares, parking lots. According to the size of the screen area of the body can be divided into a single column and double column type of installation.