The features of Optokingdom LED display wireless control solutions with ECSR control card  

1.Large scale networking: wireless LED display control center can transmit message through GSM, GPRS, CDMA, 3G etc wireless network, large scale networking is possible because it adopts TCP/IP network transport protocol, the number of terminal connection is unconstrained. 

2.Real-time data publication: wireless LED display can receive information sent by control center ay anytime.

4.Easy installation and maintenance: it’s easy to choose the LED display installation site because it doesn’t need to lay fiber cable or communication cable; the modular cabinet design makes it easy to maintain and repair; system can automatically save all the information when power failure occurs, after energized again, display can automatically play the original information; system can automatically redial when it drops connection to internet so as to ensure reliable signal connection; solution has anti-interference design to make sure the display is suitable for electromagnetic environment; solution has temperature resistance design to make sure the display fits high and low temperature environment.

5.Multiple signal transmission methods: signal can be transmitted by different methods according to the relative communication network to update the contents on wireless LED display by mass text, group text or point to point text. For example, computer can send signal via relative website or through special message sending module, signal can also be sent by mobile phone and so on.

6. Solutions are suitable for various LED display: all kinds of indoor led display, semi-outdoor led display, outdoor signal color led display, dual color led display, full color led display, etc. 

7. Solutions support multiple languages: such as numbers, letters, Chinese, English, etc.

8. Various information display modes: each signal can have its self-defined display mode and last time, it can be edited willfully and neatly.

9. Various information encryption: for example, according to user’s requirement to make setting that the identification number and check code when send signal to the display or make setting that the display can only receive signals from certain numbers to ensure the signal security.